Différences entre les versions de « Commandes groupées »
Ligne 13 : | Ligne 13 : | ||
* Xavier (gap) : 1 kit 2 poulies + 2m de courroie | * Xavier (gap) : 1 kit 2 poulies + 2m de courroie | ||
* Mathieu : 1 kit 2 poulies + 2m de courroie | * Mathieu : 1 kit 2 poulies + 2m de courroie | ||
* | * Patrick: 1 kit 2 poulies + 2m de courroie | ||
* Greg : 3 kits de 2 poulies + 2m de courroie | * Greg : 3 kits de 2 poulies + 2m de courroie | ||
* Guy : 1 kit 2 poulies + 2m de courroie | * Guy : 1 kit 2 poulies + 2m de courroie |
Version du 7 avril 2014 à 06:47
Gestion des commandes groupées
Afin de réduire les frais de port, il est intéressant de grouper les commandes chez les grossistes.
Commandes en cours
Kit Poulie Courroie GT2 20 dents pour Prusa Steel/Log
Proposée par Greg & Benj.
- Benj : 1 kit 2 poulies + 2m de courroie
- Hervé (gap) : 1 kit 2 poulies + 2m de courroie
- Xavier (gap) : 1 kit 2 poulies + 2m de courroie
- Mathieu : 1 kit 2 poulies + 2m de courroie
- Patrick: 1 kit 2 poulies + 2m de courroie
- Greg : 3 kits de 2 poulies + 2m de courroie
- Guy : 1 kit 2 poulies + 2m de courroie
- Olivier R. : 1 kit 2 poulies + 2m de courroie
- Philippe : 1 kit 2 poulies + 2m de courroie
Nema17 pour Prusa Steel/Log
Proposée par Greg & Benj.
- Laurent Baret : 5 moteurs
- Benj : 5 moteurs
- Hervé (gap) : 5 moteurs
- Xavier (gap) : 5 moteurs
- Greg : 15 moteurs
- Olivier : 5 moteurs
- fma38 : 5 moteurs (pas pour moi)
- Marc : 5 moteurs
- Mathieu : 5 moteurs
- Olivier E.: 5 moteurs
- Oliv' : 10 moteurs
- Yannick : 5 moteurs
- Mathieu L : 5 moteurs
- Mike: 5 moteurs
- Olivier R. : 5 moteurs
- Philippe : 5 moteurs
- Patrick : 5 moteurs
Imprimante P3-Steel
Proposé par Oliv'
Réalisé par Marc et Fred :)
Toutes les infos sont sur | cette page.
Prix par imprimante : 90€ (pour environ 10 kits, si on est plus nombreux il doit être jouable de renégocier)
- Oliv' : 3 kits
- Marc : 1 kit
- Benj : 1 kit
- fertito : 1 kit
- Patrick : 1 kit
- Mike : 1 kit
- Olivier R. : 1 kit
- Xavier (Lug Gap) : 2 kit
- Mathieu : 1 kit
- Felix : 1 kit
- Pierrot : 1 kit
- Steeve : 1 kit
- Colin : 1 kit
- Laurent B : 1 kit
- Greg : 3 kits
- Olivier E : 1 kit
- Guy : 1 kit
- Yannick : 1 kit
- fma38 : 1 kit sûr, peut-être 2 (mais pas pour moi !)
- Mathieu L. : 1 kit
- Philippe : 1 kit
- Théo (du chan irc reprap) : 1 kit
PCB pour leds WS2812B (seeedstudio)
Proposée par Baptiste.
Chaque plaque (5x5cm) est composée de 9 PCB qu'il faudra ensuite séparer à la dremel.
Frais de port : 11€ Prix par plaque : ~1€ Date limite : 23 mars
- Baptiste : 15+ plaques
- Olivier : 10 plaques
- Patrick : 10 plaques
- Yannick : 1 plaque
- Sly : 5 plaques
- Greg : 4 plaques
- Mickael : 1 plaque
- Benjamin : 1 plaque
- Olivier R. : 10 plaques
EXP TECH - arduino, RaspBerry Pi...
Proposée par Benjamin.
Frais de port : 0€ Date limite : 5 Mai
Commandes validées
Filaflex
Proposée par fma38.
- fma38 :
- Filaflex noir 1,75mm 250g - 19,00€
- Greg :
- Filaflex noir 3mm 250g - 19,00€
- Patrick (avance 20€) :
- Filaflex noir 3mm 250g - 19,00€
- Yannick :
- Filaflex noir 3mm 250g - 19,00€
- Marc (avance 20€) :
- Filaflex blanc 3mm 250g - 19,00€
Commande terminées
Lunettes de protection laser
Proposée par Jérôme.
- Lunettes de protection Laser Rouge: EP2
- Lunettes de protection Laser Bleu, Vert et IR: EP1
- greg : une de chaque - 82,11 €
- Benj : une de chaque - 82,11 €
- Patrick : 1x lunette laser rouge - 40,67€
- Jérôme: 1 EP1
- LOG: 2 de chaque - 164,22 €
- Prix final en euros
* Lunette Laser Rouge (EP2): 40,67 € * Lunette Laser Bleu (EP1): 41,44 €
IGUS - rails, paliers...
Proposée par fma38.
Attention, prix HT !
- fma38 :
- 2x NW-02-17 (drylin® N, chariot de guidage) - 2x 2,21€ = 4,42€
- 2x NW-02-17,P (drylin® N, chariot de guidage précontraint) - 2x 2,21€ = 4,42€
- 2x NS-01-17 (drylin® N, rail de guidage) L=50mm - 2x 0,77€ = 1,54€
Smart RGB LEDs WS2812B
Proposée par Guy.
Commande livrée.
Prix dégressif approximatif suivant la quantité atteinte :
- 100 => 17 centièmes d'euro par LED.
- 500 => 13 centièmes d'euro par LED.
- 1000 => 12 centièmes d'euro par LED.
- plus => A négocier ?
Si vous trouvez une source moins chère tenez nous au courant
Participants :
- Guy :
- 200 leds ou plus si besoin d'arrondir.
- f1smf :
- 100 leds.
- Sly :
- 200 leds.
- Jérôme :
- 200 leds.
- Olivier G. :
- 200 leds, capas
- Benj :
- 100 leds.
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
- Greg :
- 100 leds.
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
- Nerick :
- 300 leds.
- fma38 :
- 100 leds.
- Olivier Richard:
- 200 leds, capas ?
- Baptiste
- 100 leds
- Nicolas T
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
Commande de Filament
Proposée par Benj.
Attention, prix HT !
- Benj : 86,35€ TTC
- PLA - Light Blue - spool of 1Kg - 3mm - 16.99€
- PLA - Red - spool of 1Kg - 3mm - 16.99€
- PLA - White - spool of 1Kg - 3mm - 16.99€
- PLA - Purple - spool of 1Kg - 3mm - 16.99€
- Olivier : 75,02€ TTC
- fma38 : 71,21€ TTC
- ABS-PC USA - Neutral - spool 1kg - 1.75mm - 29,99€
- ABS USA - Neutral - spool 1kg - 1.75mm - 21,99€
- 10x PTFE tubing, 2inner/6outer diameter (10cm) - 10x 0,35€ = 3,50€
- Greg : 18,62€ TTC
- Kapton heater mat (20x20) - 14,51€
- Yannick : 57,32€ TTC
- PLA - Black - Spool of 1Kg - 3mm - 16,99€
- PLA - White - Spool 1Kg - 3mm - 16,99€
- ABS - White - 500g - 3mm - 9,99€
RepRap.me
Proposée par Mike.
Date limite : 05/01/2014
- Mike : $81.00
- 1x Ramps 1.4 = $81.00
- fma38 : $19.00
- 1x MK7 drive gear = $8.00
- 1x MK8 drive gear = $11.00
Frais de port $6.
DigiX sur kickstarter
(compatible arduino Due avec plus d'IO et de fonctions)
Proposée par Guy.
Livraison arrivée, Digixes livrés et payés.
- Sly : 45,50€
- 1x DigiX = 59 $ (44 €)
- A427 : 45,50€
- 1x DigiX = 59 $ (44 €)
- Guy :
- 1x DigiX = 59 $
- 1x Level Shifter Shield = 15 $
Frais de port = 6$ (4,50 € / 3 = 1,50 €)
Kits de crochetage (dx.com)
http://dx.com/p/advanced-9-piece-set-lock-picks-16417
Proposée par Baptiste
Date limite : 11/10/2013
Guy : 1 kit
Benjamin F : 3 kit (2 amis sont intéressés pour le kit et la séance démo ;-) )
Nathan : 1 kit
fma38 : 1 kit
Luc M : 1 kit
Thaz : 1 kit
Nico T : 1 kit
Bruno : 1 kit
frederic O : 1 kit
Marcelling : 1 kit
Laurent P : 1 kit
Sly : 1 kit
a427 : 1 kit
greg :
1 kit
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-green-56657
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-deep-red-56664
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-light-blue-56658
German RepRap GmbH (GRRF) - 1
Proposée par fma38.
Date limite : 16/12/2012
- fma38 : 69,80
- 1x GRRF Modular Hot-End 1,75mm avec nozzle 0,3mm (ref. EX-HE-GH175v2) = 65,95€€
- Guy : 110,75€
- 1x GRRF Modular Hot-End 3mm (ref. EX-HE-GH1) = 59,95€
- 1x GRRF 0,4mm Extruder Nozzle for 3mm Plastics (ref. EX-ZU-ED0.4) = 18.99€
- 1x Cable bundling and protection (ref. EL-VK-SP) = 1.99€
- 1x PS Plastic 3mm - natural, 750g on a small spool (ref. PK-PS-NA) = 25.99€
- J'voulais prendre du PLA au bois pour tester mais ils sont en rupture...
- Greg : 70,80€
- 1x PLA Plastic white (ref. PK-PLA-WE) = 66,95€
- idem pour le PLA bois...
- Laurent : 43,65€
- 4x Pololu A4988 Stepper Motor Driver Carrier (ref. EL-PO-A4988) = 39,80€
- Baptiste : 70,80€
- 1x PLA Plastic green transparent (ref. PK-PLA-GT) = 66,95€
Frais de port : 15,80€
Frais banquaires : 3,60€
RS Particuliers - 1
Proposée par fma38.
Date limite : mardi 11/12/2012 à 12h (pour pouvoir recevoir les pièces avant jeudi)
- fma38 :
- 4x NTB2035AS (code 1988894) = 24,21€
- 2x EPCOS B57550G104J (code 4840183) = 8,40€
- Marc : 7,50€
- 2x PIC12F509-I/P (code 6230099) = 2,00€
- 1x ATTINY13A-PU (code 6962409) = 1,95€
Frais de port : 10€
dealextreme - 1
Proposée par a427.
Date limite : 9/12/2012
Prix de la clé : $17.80
- a427 :
- 1x clé USB TNT
- greg :
- 1x clé USB TNT
- shazz :
- 1x clé USB TNT
- fma38 :
- 1x clé USB TNT
Notes :
- Prévoir un petit supplément bulk rate de moins de $2 pour la livraison
- Le bulkrate est de $1.70
- total : 4*$17.80+$1.70=$72.90
- par personne : $18.225
- la commande est partie ! apres paypal, cela donne par personne : 14.5425€
Mouser Electronics - 1
Proposée par Rémi.
Date limite : jeudi 29/11/2012.
Frais de port gratuit (+ de 65€). Prix dégressifs.
- Rémi :
- 6x 71600-010LF (logement câble) 4,51 €
- 3x 3302/10 Nappe 10 fils 0,92 €
- 1x SN754410NE Motor Driver 1,58 €
- 5x PTA45532015DPB50 Potentiomètre à glissière 4,33 €
- 20x PEC11-4020F-S024 Encodeur rotatif 19,42 €
- Total : 30,76€
- Fertito :
- 3x STM32F405RGT6 28,95€
- 1x STM32F3DISCOVERY 8,87€
- Total : 37,82€
- Koko :
- 1x Arduino 18,11€
- 3x ATtiny85-20PU 3,27€
- 1x STM32F3DISCOVERY 8,87€
- Total : 30,25€
- François :
- 2x Omron G6K-2P-DC5 6,80€
- 2x Fujitsu A-5W-K 4,92€
- 2x UC2-5NJ 5,40€
- Total : 17,12€
Commandes annulées ou différées
Alcool isopropylique
Proposée par Nerick.
5€/L par 6L ; 3,90€/L par 15L.
- Oliv' : 1L
- Nerick : 2L
Kit dissipateurs pour RaspBerry Pi
Proposée par vtx.
1,49€
Date limite : 28/06/2013
- vtx :
- 2x kits = 2,98€
fma38 :
- 4x kits = 5,96€
- Grégory :
- 3x kits = 4.47€
- 1x http://www.kibuck.com/matrice-8-8-leds-rgb.html = 9.48€
- 2x http://www.kibuck.com/badge-rfid-porte-cle.html = 1.70€
- 2x http://www.kibuck.com/bouton-poussoir-miniature-vertical.html = 0.60€
- 1x http://www.kibuck.com/telemetre-a-ultrasons.html = 6.79€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0.75€
- Olivier :
- 1x kit = 1,49€
- A427 :
- 2x kits = 2,98€
- Sly :
- 3x kits = 4,47€
- François (Franky47) :
- 2x kit = 2,98€
- 1x http://www.kibuck.com/pack-70x-cables-pour-breadboard-male-femelle.html = 6,47€
- 1x http://www.kibuck.com/pack-65x-cables-pour-breadboard-male-male.html = 4,72€
- 10x http://www.kibuck.com/jack-trs-3-5mm-stereo-pour-circuit-imprime.html = 3,10€
- Guillaume :
- 2x kits = 2,98€
- Colin :
- 1x kit = 1,49€
- Guy :
- 1x kit = 1,49€
- 5x http://www.kibuck.com/pcb-adaptateur-so8-soic8-msop-tssop8.html = 2,5€
- 1x barrette http://www.kibuck.com/barette-he14-femelle-secable-1-230.html = 0,65€
- 1x capteur PIR http://www.kibuck.com/module-pir-detecteur-de-mouvements.html = 6,6€
- 5x Leds IR http://www.kibuck.com/led-infrarouge-5mm-haute-puissance.html = 0,28€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0,75€
- Jérôme :
- 4x kit = 5,96 € (changé d'avis, j'en prend un de plus que demandé initialement)
- 5x http://www.kibuck.com/pcb-adaptateur-so8-soic8-msop-tssop8.html = 2,5€
- Laurent :
- 1x kit = 1,49€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0,75€
- 3x http://www.kibuck.com/clip-pile-9v-pro.html = 0,84€ [en T]
Estimation frais de port : 6€
Modalités de payement : paypal & smoney