Commandes groupées
Gestion des commandes groupées
Afin de réduire les frais de port, il est intéressant de grouper les commandes chez les grossistes.
Commandes en cours
EXP TECH - arduino, RaspBerry Pi...
Proposée par Benjamin.
Frais de port : 0€ Date limite : 10 Mai
RC Bay - Roulements épaulés pour P3 Steel
Proposée par Mike
12€75 par 10 + 8€90 de port
Date limite : 8 mai
- Mike :
- Patrick :
- fma38 :
- greg :
- Benj :
- Oliv' :
Commandes validées
Mouser Electronics
Proposée par Marc.
Frais de port gratuit si + de 65€
Les prix catalogue sont Hors Taxes
- Fertito
- 5 STM32F303CCT6
- 5 BSL207SP
- 5 MBRA210LT3
- 5 TC4427
- 4 ZXMN4A06GTA
- 4 AOT240L
- Greg:
- Marc:
- Oliv'
Nema17 pour Prusa Steel/Log
Proposée par Greg & Benj.
- Laurent Baret : 5 moteurs
- Benj : 5 moteurs
- Hervé/Xavier (gap) : 5 moteurs
- Greg : 15 moteurs
- fma38 : 5 moteurs (pas pour moi)
- Marc : 5 moteurs
- Mathieu : 5 moteurs
- Olivier E.: 5 moteurs
- Oliv' : 15 moteurs
- Yannick : 5 moteurs
- Mathieu L : 5 moteurs
- Mike: 5 moteurs
- Olivier R. : 5 moteurs
- Philippe : 5 moteurs
- Patrick : 5 moteurs
- Théo : 5 moteurs
- Félix : 5 moteurs
- Stéphane C (via Benj) : 5 moteurs
- Colin : 5 moteurs
- Mathieu L. : 5 moteurs
- Total : 125 moteurs
Commande terminées
Imprimante P3-Steel
Proposé par Oliv'
Réalisé par Marc et Fred :)
Toutes les infos sont sur | cette page.
Prix par imprimante : 90€ (pour environ 10 kits, si on est plus nombreux il doit être jouable de renégocier)
- Oliv' : 3 kits - récupérés
- Marc : 1 kit - récupéré
- Benj : 1 kit - récupéré
- fertito : 1 kit - récupéré par Oliv'
- Patrick : 1 kit - récupéré
- Mike : 1 kit - récupéré
- Olivier R. : 1 kit - récupéré
- Xavier (Lug Gap) : 2 kit - récupérés par Benj
- Mathieu : 1 kit - récupéré
- Felix : 1 kit
- Pierrot : 1 kit - récupéré
- Steeve : 1 kit - récupéré
- Colin : 1 kit
- Laurent B : 1 kit - récupéré
- Greg : 3 kits - récupéré
- Olivier E : 1 kit - récupéré
- Guy : 1 kit - récupéré
- Yannick : 1 kit - récupéré
- fma38 : 1 kit - récupéré
- Mathieu L. : 1 kit - récupéré
- Philippe : 1 kit - récupéré
- Théo (du chan irc reprap) : 1 kit - récupéré
- Stéphane C (collègue de taf , Benj) : 1 kit - récupéré
Kit Poulie Courroie GT2 20 dents pour Prusa Steel/Log
Proposée par Greg & Benj.
- Benj : 1 kit 2 poulies + 2m de courroie
- Hervé/Xavier (gap) : 1 kit 2 poulies + 2m de courroie
- Mathieu : 1 kit 2 poulies + 2m de courroie
- Patrick: 1 kit 2 poulies + 2m de courroie
- Yannick: 2 kit 2 poulies + 4m de courroie
- Greg : 3 kits de 2 poulies + 2m de courroie
- Guy : 1 kit 2 poulies + 2m de courroie
- Olivier R. : 1 kit 2 poulies + 2m de courroie
- Philippe : 1 kit 2 poulies + 2m de courroie
- Laurent B : 1 kit 2 poulies + 2m de courroie
- Théo : 1 kit 2 poulies + 2m de courroie
- Félix : 1 kit 2 poulies + 2m de courroie
- Stéphane C (via Benj) : 1 kit 2 poulies + 2m de courroie
- Colin : 1 kit 2 poulies + 2m de courroie
- Oliv' : 2 kits
- Olivier E. : 1 kit
- Total : 20 kits de (2 poulies + 2m de courroie)
PCB pour leds WS2812B (seeedstudio)
Proposée par Baptiste.
Chaque plaque (5x5cm) est composée de 9 PCB qu'il faudra ensuite séparer à la dremel.
Frais de port : 11€ Prix par plaque : ~1€ Date limite : 23 mars
- Baptiste : 15+ plaques
- Olivier : 10 plaques
- Patrick : 10 plaques
- Yannick : 1 plaque
- Sly : 5 plaques
- Greg : 4 plaques
- Mickael : 1 plaque
- Benjamin : 1 plaque
- Olivier R. : 10 plaques
Filaflex
Proposée par fma38.
- fma38 :
- Filaflex noir 1,75mm 250g - 19,00€
- Greg :
- Filaflex noir 3mm 250g - 19,00€
- Patrick (avance 20€) :
- Filaflex noir 3mm 250g - 19,00€
- Yannick :
- Filaflex noir 3mm 250g - 19,00€
- Marc (avance 20€) :
- Filaflex blanc 3mm 250g - 19,00€
Port : 11,70€, soit un total de 21,34€ par personne
Lunettes de protection laser
Proposée par Jérôme.
- Lunettes de protection Laser Rouge: EP2
- Lunettes de protection Laser Bleu, Vert et IR: EP1
- greg : une de chaque - 82,11 €
- Benj : une de chaque - 82,11 €
- Patrick : 1x lunette laser rouge - 40,67€
- Jérôme: 1 EP1
- LOG: 2 de chaque - 164,22 €
- Prix final en euros
* Lunette Laser Rouge (EP2): 40,67 € * Lunette Laser Bleu (EP1): 41,44 €
IGUS - rails, paliers...
Proposée par fma38.
Attention, prix HT !
- fma38 :
- 2x NW-02-17 (drylin® N, chariot de guidage) - 2x 2,21€ = 4,42€
- 2x NW-02-17,P (drylin® N, chariot de guidage précontraint) - 2x 2,21€ = 4,42€
- 2x NS-01-17 (drylin® N, rail de guidage) L=50mm - 2x 0,77€ = 1,54€
Smart RGB LEDs WS2812B
Proposée par Guy.
Commande livrée.
Prix dégressif approximatif suivant la quantité atteinte :
- 100 => 17 centièmes d'euro par LED.
- 500 => 13 centièmes d'euro par LED.
- 1000 => 12 centièmes d'euro par LED.
- plus => A négocier ?
Si vous trouvez une source moins chère tenez nous au courant
Participants :
- Guy :
- 200 leds ou plus si besoin d'arrondir.
- f1smf :
- 100 leds.
- Sly :
- 200 leds.
- Jérôme :
- 200 leds.
- Olivier G. :
- 200 leds, capas
- Benj :
- 100 leds.
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
- Greg :
- 100 leds.
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
- Nerick :
- 300 leds.
- fma38 :
- 100 leds.
- Olivier Richard:
- 200 leds, capas ?
- Baptiste
- 100 leds
- Nicolas T
- ce ruban 5M 300Leds WS2811 led strip Non-Waterproof White PCB.
Commande de Filament
Proposée par Benj.
Attention, prix HT !
- Benj : 86,35€ TTC
- PLA - Light Blue - spool of 1Kg - 3mm - 16.99€
- PLA - Red - spool of 1Kg - 3mm - 16.99€
- PLA - White - spool of 1Kg - 3mm - 16.99€
- PLA - Purple - spool of 1Kg - 3mm - 16.99€
- Olivier : 75,02€ TTC
- fma38 : 71,21€ TTC
- ABS-PC USA - Neutral - spool 1kg - 1.75mm - 29,99€
- ABS USA - Neutral - spool 1kg - 1.75mm - 21,99€
- 10x PTFE tubing, 2inner/6outer diameter (10cm) - 10x 0,35€ = 3,50€
- Greg : 18,62€ TTC
- Kapton heater mat (20x20) - 14,51€
- Yannick : 57,32€ TTC
- PLA - Black - Spool of 1Kg - 3mm - 16,99€
- PLA - White - Spool 1Kg - 3mm - 16,99€
- ABS - White - 500g - 3mm - 9,99€
RepRap.me
Proposée par Mike.
Date limite : 05/01/2014
- Mike : $81.00
- 1x Ramps 1.4 = $81.00
- fma38 : $19.00
- 1x MK7 drive gear = $8.00
- 1x MK8 drive gear = $11.00
Frais de port $6.
DigiX sur kickstarter
(compatible arduino Due avec plus d'IO et de fonctions)
Proposée par Guy.
Livraison arrivée, Digixes livrés et payés.
- Sly : 45,50€
- 1x DigiX = 59 $ (44 €)
- A427 : 45,50€
- 1x DigiX = 59 $ (44 €)
- Guy :
- 1x DigiX = 59 $
- 1x Level Shifter Shield = 15 $
Frais de port = 6$ (4,50 € / 3 = 1,50 €)
Kits de crochetage (dx.com)
http://dx.com/p/advanced-9-piece-set-lock-picks-16417
Proposée par Baptiste
Date limite : 11/10/2013
Guy : 1 kit
Benjamin F : 3 kit (2 amis sont intéressés pour le kit et la séance démo ;-) )
Nathan : 1 kit
fma38 : 1 kit
Luc M : 1 kit
Thaz : 1 kit
Nico T : 1 kit
Bruno : 1 kit
frederic O : 1 kit
Marcelling : 1 kit
Laurent P : 1 kit
Sly : 1 kit
a427 : 1 kit
greg :
1 kit
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-green-56657
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-deep-red-56664
1x http://dx.com/p/protective-aluminum-case-for-nintendo-3ds-light-blue-56658
German RepRap GmbH (GRRF) - 1
Proposée par fma38.
Date limite : 16/12/2012
- fma38 : 69,80
- 1x GRRF Modular Hot-End 1,75mm avec nozzle 0,3mm (ref. EX-HE-GH175v2) = 65,95€€
- Guy : 110,75€
- 1x GRRF Modular Hot-End 3mm (ref. EX-HE-GH1) = 59,95€
- 1x GRRF 0,4mm Extruder Nozzle for 3mm Plastics (ref. EX-ZU-ED0.4) = 18.99€
- 1x Cable bundling and protection (ref. EL-VK-SP) = 1.99€
- 1x PS Plastic 3mm - natural, 750g on a small spool (ref. PK-PS-NA) = 25.99€
- J'voulais prendre du PLA au bois pour tester mais ils sont en rupture...
- Greg : 70,80€
- 1x PLA Plastic white (ref. PK-PLA-WE) = 66,95€
- idem pour le PLA bois...
- Laurent : 43,65€
- 4x Pololu A4988 Stepper Motor Driver Carrier (ref. EL-PO-A4988) = 39,80€
- Baptiste : 70,80€
- 1x PLA Plastic green transparent (ref. PK-PLA-GT) = 66,95€
Frais de port : 15,80€
Frais banquaires : 3,60€
RS Particuliers - 1
Proposée par fma38.
Date limite : mardi 11/12/2012 à 12h (pour pouvoir recevoir les pièces avant jeudi)
- fma38 :
- 4x NTB2035AS (code 1988894) = 24,21€
- 2x EPCOS B57550G104J (code 4840183) = 8,40€
- Marc : 7,50€
- 2x PIC12F509-I/P (code 6230099) = 2,00€
- 1x ATTINY13A-PU (code 6962409) = 1,95€
Frais de port : 10€
dealextreme - 1
Proposée par a427.
Date limite : 9/12/2012
Prix de la clé : $17.80
- a427 :
- 1x clé USB TNT
- greg :
- 1x clé USB TNT
- shazz :
- 1x clé USB TNT
- fma38 :
- 1x clé USB TNT
Notes :
- Prévoir un petit supplément bulk rate de moins de $2 pour la livraison
- Le bulkrate est de $1.70
- total : 4*$17.80+$1.70=$72.90
- par personne : $18.225
- la commande est partie ! apres paypal, cela donne par personne : 14.5425€
Mouser Electronics - 1
Proposée par Rémi.
Date limite : jeudi 29/11/2012.
Frais de port gratuit (+ de 65€). Prix dégressifs.
- Rémi :
- 6x 71600-010LF (logement câble) 4,51 €
- 3x 3302/10 Nappe 10 fils 0,92 €
- 1x SN754410NE Motor Driver 1,58 €
- 5x PTA45532015DPB50 Potentiomètre à glissière 4,33 €
- 20x PEC11-4020F-S024 Encodeur rotatif 19,42 €
- Total : 30,76€
- Fertito :
- 3x STM32F405RGT6 28,95€
- 1x STM32F3DISCOVERY 8,87€
- Total : 37,82€
- Koko :
- 1x Arduino 18,11€
- 3x ATtiny85-20PU 3,27€
- 1x STM32F3DISCOVERY 8,87€
- Total : 30,25€
- François :
- 2x Omron G6K-2P-DC5 6,80€
- 2x Fujitsu A-5W-K 4,92€
- 2x UC2-5NJ 5,40€
- Total : 17,12€
Commandes annulées ou différées
Alcool isopropylique
Proposée par Nerick.
5€/L par 6L ; 3,90€/L par 15L.
- Oliv' : 1L
- Nerick : 2L
Kit dissipateurs pour RaspBerry Pi
Proposée par vtx.
1,49€
Date limite : 28/06/2013
- vtx :
- 2x kits = 2,98€
fma38 :
- 4x kits = 5,96€
- Grégory :
- 3x kits = 4.47€
- 1x http://www.kibuck.com/matrice-8-8-leds-rgb.html = 9.48€
- 2x http://www.kibuck.com/badge-rfid-porte-cle.html = 1.70€
- 2x http://www.kibuck.com/bouton-poussoir-miniature-vertical.html = 0.60€
- 1x http://www.kibuck.com/telemetre-a-ultrasons.html = 6.79€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0.75€
- Olivier :
- 1x kit = 1,49€
- A427 :
- 2x kits = 2,98€
- Sly :
- 3x kits = 4,47€
- François (Franky47) :
- 2x kit = 2,98€
- 1x http://www.kibuck.com/pack-70x-cables-pour-breadboard-male-femelle.html = 6,47€
- 1x http://www.kibuck.com/pack-65x-cables-pour-breadboard-male-male.html = 4,72€
- 10x http://www.kibuck.com/jack-trs-3-5mm-stereo-pour-circuit-imprime.html = 3,10€
- Guillaume :
- 2x kits = 2,98€
- Colin :
- 1x kit = 1,49€
- Guy :
- 1x kit = 1,49€
- 5x http://www.kibuck.com/pcb-adaptateur-so8-soic8-msop-tssop8.html = 2,5€
- 1x barrette http://www.kibuck.com/barette-he14-femelle-secable-1-230.html = 0,65€
- 1x capteur PIR http://www.kibuck.com/module-pir-detecteur-de-mouvements.html = 6,6€
- 5x Leds IR http://www.kibuck.com/led-infrarouge-5mm-haute-puissance.html = 0,28€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0,75€
- Jérôme :
- 4x kit = 5,96 € (changé d'avis, j'en prend un de plus que demandé initialement)
- 5x http://www.kibuck.com/pcb-adaptateur-so8-soic8-msop-tssop8.html = 2,5€
- Laurent :
- 1x kit = 1,49€
- 1x http://www.kibuck.com/cable-usb-a-micro-usb.html = 0,75€
- 3x http://www.kibuck.com/clip-pile-9v-pro.html = 0,84€ [en T]
Estimation frais de port : 6€
Modalités de payement : paypal & smoney